NEWS CENTER

Several wear conditions of conveyor belt

2022-01-28 16:17

1. The friction between the frame and the conveyor belt. The conveyor belt sometimes deviates due to defects caused by the manufacture, installation and use of the conveyor. When the deviation is too much, the conveyor belt will contact with the idler bracket and the frame, which will cause the edge glue to wear and even turn the conveyor belt.

2. The friction between the baffle of the guide chute and the conveyor belt. The wear of the baffle to the conveyor belt is a special kind of wear, such as improving the design method of the baffle and paying attention to maintenance, this kind of wear can be almost prevented.

3. The friction between the roller and the conveyor belt. The lower cover rubber of the conveyor belt is also subject to friction by the self-aligning idler and the forward inclined grooved idler, and wear occurs at the transition section from the grooved idler to the drum and at the curved protrusion of the conveyor.

4. The friction between the cleaner and the conveyor belt. The wear caused by the cleaner on the conveyor belt is usually uniform, but when a harder steel plate is used as the cleaning plate, if it is used improperly, the rubber other than the dirt will also be cut off. When foreign objects enter between the cleaner tip and the conveyor belt, it can also create deep scars along the entire length of the conveyor belt.

After understanding the above conditions, pay attention to observation in the future transportation process, and adjust the situation immediately to ensure the service life of the conveyor belt.

Related News

12-22

2021

What is the role of pvc conveyor belt plus guide strip?

The application of traditional conveyor belts on the factory assembly line often causes product deviation, deviation, etc., workshop workers spend time and effort to adjust, Miou anti deviation conveyor belt is a series of conveyor belts developed for products with anti deviation requirements. According to the addition of some guide bars on the surface or bottom of the conveyor belt, the anti-deviation characteristics can be achieved. And used in many industries, praised by customers. During the use of the pvc conveyor belt, sometimes there will be deviations. We add guide bars on the back of the pvc conveyor belt, so that it is not easy to deviate. Of course, in addition to preventing the deviation of the pvc conveyor belt, there are other uses for adding guide bars. 1. Protect both sides of the pvc conveyor belt. The deviation of the PVC conveyor belt will cause wear on both sides. 2. Lift and cut off.

12-22

2021

Oil resistant conveyor belt delamination? How to choose oil resistant conveyor belt

With the increase of people's demand, there are more and more types of conveyor belts, and oil-resistant conveyor belts are one of them. The food industry has a great demand for oil-resistant conveyor belts. However, many people found that the surface of the oil-resistant conveyor belt did not peel off and break during use. The main reasons for the delamination of oil-resistant conveyor belts are: 1. The problem of raw materials, the oil-resistant conveyor belt has high requirements for raw materials. If the requirements are not up to standard, the oil-resistant effect will be greatly reduced, resulting in delamination and cracking during use. 2. The problem of material composition, the oil-resistant components that need to be added to the oil-resistant conveyor belt, and some oil-resistant components of poor quality are selected for the sake of cheapness, which also leads to serious delamination of the oil-resistant conveyor belt.

12-22

2021

CHINAPLAS 2019