DFG-J horizontal flowing drier

My company has 20 years of development history of drying equipment in recent years, to meet the bulk of powder manufacturing technology needs of our company with many domestic research institutes, universities Science and Industry formed a joint venture entity.

Feedback

Product Details

Technology
▲Horizontal flowing drier was early used in 1960s．The liquid flows from the entry to the exit，Its main advantage is adjusting the time of
the liquid inside and finally．the product is equally dried．In order to approach this purpose,there is wood piece between two parts．If it is needed,
the cooling and drying procedures will happen in the same device．which is adding a cooling part in the end．After the product flows out the exit，it can be packed directly，which will make the process much simpler．

Principle
▲The clean hot air flows into the drier，which gets the wet material boiled．Then the material is dried in a short time and flows out from the exit．The wooden piece works to control the degree of the dried material．

Technical Parameters

item model	vaporized water	fan engine's power	fan pressure	fan speed	temperature	L×W×H	way of getting material
10	10-15	7.5	5.5	1500	60-200	4×3.5×3.2	1.scattered materials 2.air current transportation 3.self flowing
20	20-25	11	5.8	2000	60-200	4.5×4×4.2
30	30-40	18.5	7.1	3850	60-200	5×4×4.5
50	50-80	30	8.5	7000	60-200	5×4.8×4.8